Mold remediation referrals for Philadelphia & nearby townsCall: (215) 774-2847
(215) 774-2847

Mold in Walls in Lansdowne, PA

moldremediationphiladelphia.net

A stain, a soft baseboard or a musty corner in Lansdowne can point to growth behind the plaster or drywall that nobody can see.

Paint bubbling over a wall in Lansdowne?
Call now to be connected with a local mold remediation company in Lansdowne.
(215) 774-2847

Locating wall mold begins with dampness readings rather than paint color. A local company runs a meter, sometimes adds a thermal camera, and cuts a modest inspection hole where the numbers spike so it can see the back of the plaster or board. Call the number on this page to be connected with a local mold company in Lansdowne.

Opened wall showing mold on the back of drywall and on studs, mold in walls in Lansdowne, PA

Reading the Clues

ObservationPossible meaning
Blistered paintWater pushing outward from behind
Swollen trim at the floorMoisture climbing from below
Odor with no stainA damp, closed cavity

Meter readings tell which one fits your wall, and a small opening confirms it before anyone starts removing material.

Drywall in newer construction

Newer houses use paper-faced drywall, which soaks water up fast and feeds growth readily. A small leak in a bath wall, a loose window flashing or a poorly sealed penetration can wet one section. Drywall is easy to cut and patch, so the repair is often tidy once the source is known.

Call now to be connected with a local mold remediation company in Lansdowne.
(215) 774-2847
Inspection hole cut into drywall revealing mold inside the wall, mold in walls in Lansdowne, PA

Same Wall, Different Numbers

One bid may cover only demolition while another adds drying equipment, containment and closing the opening. Read what each includes before choosing. A smaller number that forces you to hire another trade just to close the wall is not always the better offer.

Why they cut small holes first

An inspection opening is just large enough to see the back of the wall finish, the insulation and the bottom plate. It is far easier to patch than an entire wall. If the cavity is clean and dry, the opening is closed and you know the smell has another source.

Keeping humidity in check

EPA recommends keeping indoor humidity below about 60 percent, and ideally between 30 and 50. In muggy summers that means running a basement dehumidifier and bathroom exhaust fans. In winter, a little airflow along outside walls keeps condensation from lingering. Drier air makes a cavity less welcoming.

Local details for Lansdowne

Home improvement contractors working on Pennsylvania homes generally must register with the Attorney General's office, and the registration number (it starts with PA) has to appear on contracts, estimates and ads. The office's online search confirms it.

Some owners hire one independent company for the inspection and clearance check and a different company for the cleanup, so the business judging the result isn't the one that did the work.

If the job grows into replacing drywall, cabinets or framing, ask whether the rebuild needs a permit from the township or borough building office for your address.

If river, creek or storm water got inside, FEMA's flood map service and your insurer can tell you how the address is zoned.

Nearby, the same kind of help is available in Upper Darby, Darby and Drexel Hill.

Mold in Walls questions in Lansdowne

Will they tear out the whole wall?
Usually not. The wet area is mapped first, and only the affected material comes out, plus a margin around it. Leaving sound material in place also keeps the dust, the cost and the patching down.
Is there a state license for mold companies?
Neither Pennsylvania nor New Jersey sets a state mold standard for companies, so request references, a written scope and details on training before you hire.
Who closes and paints the wall afterward?
Often a general contractor. Many remediation firms finish after removal and drying, leaving plaster patching, taping and paint to another trade, so clarify this first. Some firms offer the rebuild as an extra phase, but it is priced and scheduled separately.
What are the signs of mold behind a bathroom wall?
Soft or discolored drywall near the tub, loose tiles, grout that keeps darkening and a smell that returns after cleaning all point to a wet cavity behind the tile.

More mold services in Lansdowne

Mold in Walls nearby

Call now to be connected with a local mold remediation company in Lansdowne.
(215) 774-2847

Last updated:

☎ Call (215) 774-2847