A mold remediation job follows a fairly standard order: find and stop the water, contain the area, remove what is damaged, dry and clean, then rebuild. Here is what each stage usually involves and what to ask about before work starts.
People often picture mold remediation as someone spraying a product on a wall. In practice, spraying is a small part of it. The core of the work is moisture control, careful removal of damaged material and keeping spores from traveling to clean parts of the house. The details change with the building, but the sequence below is what most jobs in Philadelphia rowhouses, suburban twins and South Jersey ranch homes have in common.
Step 1: Find and stop the water
Mold needs moisture. The New Jersey Department of Health notes that mold spores need water to grow and that problems usually occur when there is excess water, and it recommends a building inspection to find the source when it is unclear. The Delaware Division of Public Health calls finding and fixing the moisture source the most important step. If a leak or a damp foundation wall is still feeding the problem, cleaning first only buys you a rerun.
Around Philadelphia the usual suspects include a leaking roof on a flat rowhouse, a failed parapet or flashing along a party wall, old supply and drain pipes, a sump pump that stopped, window wells, and condensation on cold surfaces in winter. Sometimes a plumber or roofer has to come first. A remediation company can tell you what it sees, but it may not fix the cause.
Step 2: Assessment and a written scope
Before work starts, someone looks at the affected area, checks adjacent rooms and moisture readings, and defines what will be removed and what will be cleaned. Ask for the scope in writing. It should name the rooms, the materials, the containment method and what the price includes. If you are unsure whether you need an inspection first, see mold inspection vs mold testing and the mold inspection page for Philadelphia.
The EPA says that in most cases, if visible mold growth is present, sampling is unnecessary. Some jobs still use testing, especially for a documented result at the end, which we cover in Step 7.
What the first visit looks like
Expect questions about when you first noticed the problem, any past leaks or floods, recent roof or plumbing work, and whether anyone has already cleaned or painted over the area. Painting over mold hides it without addressing moisture, and the patch often returns through the paint. Have photos ready and know where the main water shutoff and the electrical panel are. In a rowhouse or twin, tell the company about the neighbors on each side, because a shared wall can carry moisture from next door and the fix may involve a conversation with the adjoining owner.
It also helps to ask how long the work will take, how the area will be sealed off, whether the work area will be left open overnight, and how debris will leave the house. A good answer is specific. A vague answer is a reason to ask more questions before you sign.
Step 3: Protect the house and the people
Containment keeps disturbed spores in the work area. Crews typically hang plastic sheeting, seal doorways and vents, and run air scrubbers with HEPA filtration, sometimes with the work area under negative pressure. Workers wear protective gear. In a basement with a furnace, the heating system may be shut down or covered so it does not circulate dust. Where ducts are involved, the HVAC and duct mold removal process adds its own steps.
You may be asked to move out of the work zone, to protect pets and plants, and to move stored items ahead of time. If anyone in the home has a health condition, tell the company and talk with your doctor about whether to stay in the house.
Step 4: Remove what is damaged
Porous materials that are visibly moldy or that stayed wet are usually removed and bagged: drywall, ceiling tile, insulation, carpet and padding. Wood framing is more often cleaned and dried than replaced, unless it is rotted. Hard surfaces such as concrete, block, brick and stone, which are common in older Philadelphia basements, are cleaned.
The EPA says biocides such as chlorine bleach are not recommended as a routine practice during mold cleanup. Expect the emphasis to be on physical removal with HEPA vacuuming and damp wiping, not on a fog or spray that leaves growth behind. Ask what products will be used and why.
Step 5: Dry everything
The EPA says water-damaged areas and items should be dried within 24 to 48 hours to prevent mold growth. After removal, a company typically sets up dehumidifiers and fans and takes moisture readings until the framing and slab are down to normal levels. The EPA also suggests keeping indoor humidity below 60 percent, ideally between 30 and 50 percent. That is as much your job after the crew leaves as it is theirs during the work. A basement dehumidifier and a working sump pump are not optional in many old stone-foundation houses. If you are dealing with a below-grade space, the rowhouse and twin basement mold guide explains why they stay damp.
Step 6: Clean and, if needed, rebuild
After removal and drying, surfaces are HEPA vacuumed and wiped. Rebuilding, meaning new drywall, insulation, trim and paint, is often handled separately or by the same company under a second line of the contract. Philadelphia L&I says gypsum wallboard installed over existing wall surfaces and ceiling material applied directly to existing ceilings do not need a permit in one- or two-family dwellings, and painting and papering do not either. Structural work or major repairs may. Ask who is responsible for permits.
Step 7: Clearance, when it is wanted
Post-remediation verification is a check that the job worked. It can be a visual inspection, moisture readings and sometimes air or surface samples taken by a separate party. Having it done by someone other than the remediator avoids a conflict of interest. Delaware's health division says it does not routinely recommend mold testing, so clearance is a choice you make based on the job, a lender or insurer's request, or your own peace of mind. Read post-remediation clearance testing: when and why, or see the post-remediation clearance testing service page.
Checks on the company
Pennsylvania has no state mold license; the Department of Health says there are no federal or Pennsylvania state regulations about mold. What you can check is the Attorney General's home improvement registration, where required, along with a written contract, the "PA" number on paperwork and the three-day right to cancel notice for qualifying contracts. In Philadelphia, the City also issues contractor licenses, with an exemption for businesses working only on existing one- or two-family homes. New Jersey's Department of Health states there are no State certification programs for mold companies, so New Jersey homeowners rely on Division of Consumer Affairs registration. Delaware requires contractors to hold a business license from the Division of Revenue. The full checklist is in hiring a mold company in PA, NJ or Delaware.
How long and how much
Small jobs can be done in a day or two; larger ones with drying take longer. Cost depends on area, materials and access. A Philadelphia cost guide lists about $13 to $25 per square foot, and about $1,300 to $2,500 for a 100 square foot project. Those are guide figures, not quotes. Our cost guide for Philadelphia breaks down what moves the price.
For the main service overview, start with mold remediation in Philadelphia, or look at the full list of guides.
Frequently asked questions
What is the first step in mold remediation?
Do they test for mold before and after the job?
What materials usually get thrown out?
Do I need a permit for mold remediation in Philadelphia?
Sources
- EPA: A Brief Guide to Mold, Moisture and Your Home
- New Jersey Department of Health: Mold
- Delaware Division of Public Health: Mold in Your Home
- Pennsylvania Department of Health: Mold Fact Sheet
- Pennsylvania Attorney General: Home Improvement Contractor Registration FAQ
- Philadelphia L&I: Get a Building Permit
- Philadelphia L&I: Get a Contractor License
- HomeBlue: Mold Remediation Cost in Philadelphia
Last updated: