Older plaster-and-lath walls and newer drywall behave differently when wet, but both can hold moisture for a long time. The company chooses the opening method and the scope based on what the wall is made of. Call the number on this page to be connected with a local mold company in Bryn Mawr.

Telltale Signs Behind the Finish
Wall mold seldom shows itself directly. Look for blistering paint, lifting wallpaper, baseboards that swell at the floor, a spongy patch near the bottom of the wall or a stain that bleeds through fresh paint. An earthy odor concentrated in one room is a similar hint worth acting on.
Plaster and lath in older houses
Older homes in this part of Delaware County often have plaster over wood lath instead of drywall. Plaster tolerates moisture for a while, then blisters, crumbles or traps dampness against the lath. Mold can grow on the back of the lath and in the cavity without much outward sign.

Stopping the Source Costs Extra
Taking out moldy material does nothing about the failed pipe, window seal or flashing behind it. A plumber, installer or roofer typically handles those, and insurers often ask for proof of the repair. Fixing the source first spares you from paying twice for one wall.
Who handles what in Bryn Mawr
Pennsylvania's Department of Health says there are no federal or state regulations about mold, so no state mold license exists to look up. What you can check is the company's home improvement contractor registration with the Pennsylvania Attorney General.
Some owners hire one independent company for the inspection and clearance check and a different company for the cleanup, so the business judging the result isn't the one that did the work.
Check with the township or borough building office for your address before walls, cabinets or flooring go back in if the work goes beyond cleanup.
For flood zone questions after a heavy rain, FEMA's flood maps and your insurance agent can confirm the mapped zone for an address.
Nearby, the same kind of help is available in Haverford, Ardmore and Gladwyne.
Finding What Is Out of Sight
A visit opens with a moisture meter held to the wall to locate damp zones, often followed by a thermal camera that reveals cooler wet patches. The camera cannot detect mold; it only shows temperature contrast. Readings decide where a small opening goes to confirm the cause.
The Clock Is Running
A damp cavity keeps nourishing growth daily, and board or plaster that stays soaked normally has to be replaced. EPA suggests drying wet materials inside 24 to 48 hours. If a leak has gone on longer, an early look limits how much gets opened.
Mold in Walls questions in Bryn Mawr
Can mold really grow behind drywall or plaster unseen?
Who closes and paints the wall afterward?
Do I need a permit to open a wall for mold removal?
Should I move furniture away from a stained wall?
More mold services in Bryn Mawr
Mold in Walls nearby
Helpful guides
Sources
Last updated: