People searching for black mold usually want to know one thing: is what is on my wall dangerous? Color cannot answer that, so here is what black growth can and cannot tell you, and what to do about it in a Philadelphia-area home.
What people mean by black mold
"Black mold" is a popular name, not a diagnosis. Many different molds look dark green, gray, brown or black, and the same mold can look different depending on the surface, the moisture and how long it has grown. A dark spot on a bathroom ceiling, on basement drywall or on the back of a closet wall may be one of dozens of kinds, and you cannot sort them out by eye. Even trained people usually need a lab to name a specific one.
That is why color alone should not drive your decisions, in either direction. A black patch does not prove a special danger, and a patch that is white, green or orange is not automatically harmless. What matters more is how much there is, how long it has been wet, where it sits in the house and who lives there.
What official sources say
EPA says that in most cases, if visible mold growth is present, sampling is unnecessary. In other words, you do not need a lab to tell you to deal with it. The Pennsylvania Department of Health's fact sheet says a homeowner can clean up mold themselves if they have no health problems and the area is less than 10 square feet, and it says to hire a contractor if the area is larger or if you have asthma, COPD, are pregnant or have other health issues. EPA's guide uses the same 10 square foot line for a homeowner job.
The Pennsylvania Department of Health also states: "There are no federal or Pennsylvania state regulations about mold." That cuts both ways. There is no special state rule for black mold and no special state license for black mold removal. Delaware's Division of Public Health says the most important step is finding and fixing the moisture source, and that it does not routinely recommend mold testing. New Jersey's Department of Health says mold problems usually occur when there is excess water. Across all three states the advice points the same way: moisture is the issue, and growth follows it.
This guide does not make health claims of its own. If someone in your home has symptoms or a medical condition, talk with your doctor and follow what the health department says.
Why it grows where it does
Mold needs moisture and food. In Philadelphia-area homes the usual spots are the same ones that stay damp:
- Basements. Old masonry walls, floor slabs and sump pits hold water, and stored cardboard is food. See our guide to mold in rowhouse and twin basements.
- Attics and top floors. Winter condensation on cold roof sheathing can leave dark staining. The guide on winter condensation and attic mold explains why.
- Bathrooms and kitchens. Steam with no working fan, a leak under a sink or behind a tub.
- Walls near plumbing. Older galvanized and cast-iron lines can weep inside a wall for months.
- Ducts and air handlers. Condensation in a duct run or around a coil.
- Party walls and roofs. A flat rowhouse roof that ponds or a neighbor's leak can feed a wall you cannot see.
Anything that stayed wet for more than a day or two is a candidate. EPA says water-damaged areas and items should be dried within 24 to 48 hours to prevent mold growth.
What to do when you see dark growth
- Find the water. If you cannot find a source, there is a good chance the growth will return. A leak, a condensation problem, a roof or foundation issue, or a humidity problem is behind it.
- Estimate the size. Hold a tape measure or a sheet of paper to it. If it is under roughly 10 square feet, is on a hard surface and nobody in the home has a health concern, EPA and the state describe it as a homeowner job.
- Be careful with cleaners. EPA says biocides such as chlorine bleach are not recommended as a routine practice during mold cleanup, and warns never to mix chlorine bleach with cleaners that contain ammonia.
- Do not disturb it more than needed. Scrubbing or tearing out a large area without a plan can spread spores to clean rooms. Our guide to DIY mold cleanup versus hiring a pro covers what a careful homeowner job looks like.
- Dry and check. Fans, a dehumidifier and a hygrometer. EPA suggests keeping indoor humidity below 60 percent, ideally between 30 and 50 percent.
If you cannot see where it is coming from, or you smell mold and see nothing, read musty smell but no visible mold.
When to call a mold company
Consider calling when the area is larger than about 10 square feet, when it keeps returning after cleaning, when it is inside a wall or above a ceiling, when it follows a flood or burst pipe, when it is in HVAC ducts, or when someone in the home has asthma, COPD, is pregnant or has other health issues. In a rental, tell the landlord first; our guide to mold in a rental covers tenant basics.
The service pages describe the work: black mold removal in Philadelphia for the removal side, and mold testing in Philadelphia if you do want sampling. A company that says it will test to find out whether it is the "bad" kind before it does anything is worth a follow-up question, since EPA says sampling is generally unnecessary when growth is visible. Testing can make sense when there is a smell and nothing visible, when you need documentation, or after the work, and our mold inspection versus mold testing guide explains the difference.
What it can cost
The published ranges depend on how much is affected, not on the color. National figures from HomeGuide give $2,000 to $10,000 for a job described as Stachybotrys, and Fixr gives $800 to $7,000 for black mold removal. For comparison, a Philadelphia cost guide gives about $13 to $25 per square foot for mold remediation in general, and a 100 square foot project at about $1,300 to $2,500. These are published ranges, not quotes. Our mold remediation cost guide goes through what pushes a job up or down.
Checks before hiring
Pennsylvania has no state mold license, so a company cannot show you one. What you can check is the home improvement contractor registration with the Attorney General, which anyone doing home improvements on private residences in Pennsylvania generally needs unless total work is under $5,000 in a year. The number ("PA" plus digits) should appear on the contract and in ads, a contract over $500 must be in writing, and it must carry the three-day right to cancel. In Philadelphia, a City contractor license is required for most construction and repair businesses, with an exemption for those working only on existing one- or two-family homes. If you are across the river in New Jersey or in Delaware, the rules differ. Our hiring guide has the full list.
Next step
Tell the person you reach where it is, roughly how large it is, whether you know the cause and whether anyone in the home has a health concern. The pages for mold removal in Cherry Hill and mold removal in Wilmington show how we cover the New Jersey and Delaware side of the area.
Frequently asked questions
Is black mold always dangerous?
Do I need to test black mold to know what it is?
Does Pennsylvania have special rules for black mold?
Can I clean it with bleach?
Sources
- EPA, A Brief Guide to Mold, Moisture, and Your Home
- Pennsylvania Department of Health, Mold Fact Sheet
- Pennsylvania Office of Attorney General, Home Improvement Contractor Registration FAQ
- City of Philadelphia, Get a Contractor License
- New Jersey Department of Health, Mold
- Delaware Division of Public Health, Mold in Your Home
- HomeGuide, Mold Remediation Cost
- Fixr, Mold Remediation Cost
Last updated: